We deliver overnight to
North America and can
offer same day shipping
to many locations!
From only $75/day!



Enter your email address below for a free subscription to Inspection Innovations quarterly e-newsletter.


atlas inspection technologies > winter 2008 newsletter

Winter 2008

Inspection Innovations
 
Winter 2008
An E-Newsletter for the Remote Visual Inspection (RVI) Community.
In This Issue
Basic Resolution Testing
Free Webinar - Panoramo Technology
New From Atlas - 4mm IT Concepts Videoscope
Recommended Reading - Good to Great
Up-Coming Events
Featured Article: The Benefits of Integrating "Lean Thinking" Concepts into the Management of Infrared Predictive Maintenance

Basic Resolution Testing

 
 
       Resolution Test Chart Article image
 
By Gary Reif 
Engineering Manager

Applied Imaging

 

A resolution test chart is used to allow quick and easy testing of the ability of an optical system to produce images with fine detail. The patterns are in groups which progressively get smaller. The smallest group for which the correct number of bars and spaces can be counted (in both directions) is the system resolution. Resolution is most commonly measured in cycles per mm (cy/mm), where a bar and a space equal one cycle. For example, a test image that has 5 cy/mm bars and spaces will have a bar 0.1mm wide and a space 0.1mm wide.

 

 

Free Webinar

Panoramo view

 
Subject: Panoramo Technology
 
 
Date:     Thursday, March 6, 2008 
Time:    11:00 AM  PST
 
Length:1 Hour (40 min presentation 20 min Q&A)
 
Presenter:  Eric Sullivan, Atlas Inspection Technologies
 

Do you do mainline pipeline inspections?  Have you heard of  the breakthrough technology called PANORAMO?  What is PANORAMO and how does it work?

 
 
  • How is PANORAMO different from the convention pan & tilt method? 
  • How will PANORAMO allow me to inspect more than twice as much per day at a cost of 30% less?
  • What does a PANORAMO inspection look like?
 
To register for this free on-line webinar contact us at atlasinformation@atlas-inspection.com
 

New From Atlas

CT Vane jpeg
 
Introducing the 4mm IT Concepts Videoscope
 
IT Concepts is quickly making a name for itself as a provider of videoscopes with superb image quality, ease of use, and portability.  The pricing for this unit is highly competitive.  In addition to the 4mm scope released this year, IT Concepts offers 8mm and 6mm scopes.
  • Works in small diameter access points (perfect for compressor turbine inspections)
  • 2-way, one-handed articulation with tactile feel
  • 77,000 pixels for an incredibly clear image
  • Component level repairs for extended life and affordable maintenance
  • Expanded "video integration" for optimal light capture
  • Forward and side-view tip adapters
  • Powerful 24W Metal Halide Lamp
  • Works with existing iTool imaging systems for digital image capture

To request more information click here

or call Atlas at 800.281.0650

 

Recommended Reading 

            Good To Great Book Cover
Title:              Good To Great
 
Author:           Jim Collins
 
Reviewed by:   Cathi Spitser

Atlas has found another MUST Read in "Good to Great" by Jim Collins.  Although not written for the RVI community directly, EVERY business - no, make that EVERY ONE, can benefit from this book. It's an easy read and very engaging.  No doubt after you finish each chapter you'll want to discuss the implications for your company.

 

Jim Collins and his research team began by looking at 29 Fortune 500 companies, and filtered them down to an elite group of 11 companies whose cumulative stock market returns beat the general market by an average of 7 times, and maintained that average for 15 years or more.  Jim's team then systematically scoured every detail about these companies to find out what enabled them to move from beyond being good companies, to off the chart "Great".  In each case, the companies' successes could not be explained away by timing, or product, or technology.  Instead, each company had the following qualities:

 

Up-Coming Events

 
Event: Heli-Expo
Date:  Feb 24 - 26 2008
Place: George Brown Convention Center - Houston, TX
Event: Pumper and Cleaner Enviromental Expo
Date:  Feb 27 - March 1, 2008
Place: Kentucky Exposition Center - Louisville, KY
 
Event: Central A.M.E. Association Symposium
Date:  March 5 - 7, 2008
Place: Best Western Victoria Inn, Winnipeg - Manitoba
 
Event: Aviation Industry Expo
Date:  March 18 - 20, 2008
Place: Dallas Convention Center - Dallas Texas
The Benefits of Integrating "Lean Thinking" Concepts into the Management of Infrared Predictive Maintenance Programs

Fred Colbert

By: Fred Colbert

www.ThermalTrend.com

 

Lean Thinking is nothing new, nor many of its concepts, but the real value is in how these concepts are integrated into a total solution. Many companies today are either Lean Companies, or are utilizing Lean Thinking to maintain a competitive advantage in the market, for example

(Dell, Southwest Air Lines, FedEx). With the ever-changing demands that are placed on company resources, rapid changes in personnel because of downsizing, and the demand to "do more with less" while increasing productivity and value, many companies have been applying Lean Thinking to the management of their maintenance programs. Companies like Ford, GM, Boeing, WE Energies, Entergy, Hawaiian / Maui Electric, Florida Power and Light and KEPRI, have all established Lean IR programs and are able to better manage and maintain the real value of their IR programs while drastically increasing their ROI.

 

 

Click here to continue article

 

 

Quick Links
 
RVI Rentals
 
 
 
 
Atlas offers rentals, sales, on-site repairs and off-site repairs with a focus on RVI equipment. 

 
Atlas Inspection Technologies
Toll Free: 800.281.0650
Intl: 206.774.8704
 
 
Join Our Mailing List
Inspection Innovations is a quarterly subscription based free e-newsletter published for the Remote Visual Inspection (RVI) community. Inspection Innovations publishes relevant articles covering best practices, tips and tools, industry news, anecdotes, education, advancements, up-coming events, and book reviews.
 
For questions, comments, or submissions, please
contact the editor at:
Innovations@atlas-inspection.com
 
We have the applications knowledge, the right equipment, and the best value!

Contact Us | About Atlas Inspection | Borescope Innovations | Resource Links | Inspection Insights Blog | Site Map