Surface Eddy Current Array

Surface Eddy Current Array

0.00

Packaged with the latest technology, Reddy and its embedded data analysis software offer the most intuitive user experience, which includes real-time C-scans, a modern, rugged, and large multi-touch interface, as well as many other features that enable fast, high-PoD surface inspections. Meet the first portable instrument that unlocks ECA surface inspection for a vast set of new applications.

Detecting and Sizing Cracks in Carbon Steel Welds

The Sharck™ is based on tangential ECA (TECA™) technology, which was specifically developed for cracking in carbon steel. Not only does it enable measuring surface-breaking crack position and length, but also sizing cracks as deep as 7 mm (0.28 in). Furthermore, the Sharck allows simultaneously scanning the weld cap, toe area, and heat-affected zone for longitudinal and transverse cracks without surface preparation or paint removal.

Detecting and Sizing Cracks in Stainless Steel Welds

Padded ECA probes adapt to geometry variations in almost every direction, making the probes perfect for examining weld beads, transitions, and heat-affected zones (HAZ). The probe’s design enables detecting surface cracks 0.5–1.0 mm (0.02–0.04 in) long in welds with minimal surface preparation. The probe’s membrane is extra-tough to better withstand friction.

Assessing Corrosion on Aluminum and Stainless Steel Tank Floors

Semi-flexible ECA probes can adapt to a tank floor’s curvature and other geometric features, offering sufficient penetration to scan through thick aluminum/stainless steel (over 0.250 in or 6.35 mm thick). So doing, the solution is capable of detecting and characterizing corrosion-related defects such as pitting and thinning affecting as little as 10 % of a plate’s thickness.

Detecting and Assessing Stress Corrosion Cracking in Base Metal

I-Flex™ probes are the most versatile ECA probes in the industry. Thanks to their multiple built-in topologies and flexible bodies, they can address a variety of applications. I-Flex probes are perfect for detecting stress-corrosion cracking (SCC) in both ferrous and non-ferrous materials. Whether SCC is affecting the integrity of pipelines, pressure vessels, or tanks (on base metal or internal cladding), encoded scans performed with I-Flex probes allow efficient sizing of clusters.  

Magnifi® SR

This version of the Magnifi software allows you to perform advanced analysis of the data acquired with Reddy directly on your computer. Magnifi SR offers the same graphical user interface than Magnifi GO so any analyst can be up and running in next to no time, with a wider range of large monitor data layouts than Magnifi GO. This means that Reddy units can be out acquiring data in the field while analysts are hard at work on their computers extracting value from the data. Furthermore, with Magnifi SR you can easily plan and set up inspections for several Reddy instruments to make the most of your hardware.

Add To Cart